Filter
Top Products
WARNING
Do not use the printer in the following places.
Unstable or inclined surfaces.
Places exposed to dust and other particles (such as outdoors, particularly on a
beach).
Places subject to rain and water drops, or enclosed places where condensation
could occur such as inside a plastic bag.
Do not use the printer with a power supply other than that specified.
Incorrect voltage may damage printer parts, possibly resulting in fire or electric
shock.
Connect the power cord correctly.
For example, if the power cord is plugged in loosely, it may cause a fire or electric
shock. Push the plug all the way into the outlet.
Make sure that excessive dust and foreign matter do not accumulate on the
power cord.
Dust and foreign matter conduct electricity, which can cause fire and electric
shock. If excessive dust and foreign matter accumulates on the cord, unplug the
cord and clean it.
Immediately unplug the power cord when an electric storm starts outside.
The induced electricity from storms may cause fire, electric shock, or printer
malfunction.
Do not hold the power cord plug with wet hands.
Doing so may cause an electric shock. Be sure your hands are dry before handling.
Do not overload the power outlet.
This printer should be plugged into a separate 110-120 V AC, 60 Hz circuit. If the
printer is on a circuit with other appliances, an overload may cause fire or electric
shock.
7