1 Plug in
Plug into a 13 amp fused electrical socket. You will be
reminded to read your operating instructions.
2 Press Timer Pad twice to set clock
Set clock as a 24 hr clock. (See page 23 for details).
3 Press Convection Pad
( will appear in the display window with the oven
temperature)(this procedure is to burn off the oil used for
rust protection in the oven.) Turn the Auto
Menu/Temperature dial until 250 C is in the display
window. Remove all accessories from the oven.
4 Enter Time
Turn Time/Weight dial until 5 minutes is displayed in the
window.
5 Press Start Button
The time will be displayed in the window and count
down. The oven will beep at the end of the program. The
oven is now ready to use.
Caution: Grill elements and oven will be hot.
6 Demonstration Mode
This is to enable you to experiment setting various
programs. (The letter D will always appear in the display
window. This is to confirm that there is no microwave
power produced and it is safe to use the oven without
any food). To set Demonstration Mode: press micro
power once, then press Stop/Cancel 4 times. To cancel
Demonstration Mode press Micro power once, then
press Stop/Cancel 4 times.
7 Child Lock
To operate the child lock facility press the Start Button
three times, this will deactivate the microwave. “Lock” will
appear in the display and none of the controls will
operate. To clear child lock facility press Stop/Cancel pad
three times.
Letʼs Start to Use your Oven
22