Filter
Top Products
English
21
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
TV has only an antenna
input jack
Use this connection if your TV has only a
single Antenna In jack (or labeled as
75 ohm or RF IN) and does not have any
audio/video jacks.
For this connection, you need a RF
modulator in order to view the disc
playback.
A
You may have an Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver/VCR) connected to your TV’s
antenna input jack (VHF/UHF RF IN.)
Remove it from the TV and connect it to
the ANTENNA (IN) jack on the
recorder.
B
Use the RF coaxial cable to connect the
TV (OUT) jack on the recorder to the
antenna input jack on the RF modulator.
C
Use an RF coaxial cable (not supplied) to
connect the TO TV jack on the RF
modulator to the antenna input jack on
your TV.
D
Use the supplied composite video cable
(yellow) to connect the VIDEO OUT
jack on the recorder to the video input
jack (or labeled as A/V In, Video In,
Composite or Baseband) on the RF
modulator.
E
Use the supplied audio cables (red/white)
to connect the AUDIO OUT (L/R)
jacks on the recorder to the audio input
jack (or labeled as AUDIO IN or LINE
IN) on the RF modulator.
Helpful Hints:
– If you have used the TV (OUT) jack to
connect your recorder to TV, set your TV to
channel 3 or 4. If you have used
VIDEO OUT/AUDIO OUT L/R connections,
set the TV to the appropriate video input
channel.
– See your electronics retailer for details on
RF modulator availability and operations.
Step 2 : Optional Connections
COMPONENT VIDEO OUT
CABLE
SATELLITE
ANTENNA
AUDIO IN
R L
VIDEO
IN
TO TV
ANT IN
CH3 CH4
TV
A
B
C
D
E
pg001-pg080_RTH718_eng_98.indd 21pg001-pg080_RTH718_eng_98.indd 21 2006-10-20 10:41:51 AM2006-10-20 10:41:51 AM