English
24
Step 2: Optional Connections (continued)
Connecting to a VCR and
Cable Box/Satellite Receiver
A
Connect the Antenna/Cable TV signal to
the antenna input (RF IN) jack on the
Cable Box/Satellite Receiver.
B
Use the RF coaxial cable to connect the
ANTENNA (IN) jack on the recorder
to the RF OUT jack on the Cable Box/
Satellite Receiver.
C
Use a RF coaxial cable to connect the
TV (OUT) jack on the recorder to the
antenna input jack on your TV (VHF/UHF
RF IN.)
D
Use the supplied audio/video cables to
connect the VIDEO IN - EXT 1 and
AUDIO IN (L/R) jacks on the recorder
to the matching VIDEO/AUDIO output
jacks on the Cable Box/ Satellite
Receiver.
E
Use the audio/video cables to connect the
VIDEO OUT and AUDIO OUT (L/R)
on the recorder to the matching VIDEO/
AUDIO input jacks on the TV.
F
Use an AV cable (a 3.5mm AV connector
at one end and three video/audio cables
at the other) to connect the 3.5mm AV
IN jack on the front panel of the
recorder to the matching VIDEO/AUDIO
output jacks on the VCR.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
VIDEO
IN
OUT
IN
AUDIO
L
AUDIO
R
VIDEO
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
S-VIDEO
COMPONENT VIDEO OUT
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
TV
RF
S-VIDEO
OUT
IN
AUDIO
R L
VIDEO
CABLE
SATELLITE
ANTENNA
A
B
C
D
E
F
pg001-pg080_RTH718_eng_98.indd 24pg001-pg080_RTH718_eng_98.indd 24 2006-10-20 10:41:55 AM2006-10-20 10:41:55 AM