Filter
Top Products
English
23
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Step 2: Optional Connections (continued)
COMPONENT VIDEO OUT
AUDIO
OUT
S-VIDEO
IN
VIDEO IN
TV
VIDEO
IN
OUT
IN
AUDIO
L
AUDIO
R
VIDEO
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
CABLE
SATELLITE
ANTENNA
Connecting to a VCR or
other similar device
This connection enables you to record
from a video tape to the HDD or a DVD
recordable disc and allows the VCR to be
used for playback if the recorder is
turned off.
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to
your VCR.
A
Connect the Antenna/Cable TV signal to
the ANTENNA (IN) jack on the
recorder.
B
Use a RF coaxial cable to connect the
TV (OUT) jack on the recorder to the
antenna input jack on your TV (VHF/UHF
RF IN.)
C
Use the audio/video cables to connect
the VIDEO IN - EXT 1 and AUDIO
IN (L/R) jacks on the recorder to the
matching VIDEO/AUDIO output jacks on
the VCR.
D
Use the audio/video cables to connect
the VIDEO OUT and AUDIO OUT
(L/R) jacks on the recorder to the
matching VIDEO/AUDIO input jacks on
the TV.
Helpful Hints:
– Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
– Connect the recorder directly to the
TV. If there is a VCR or an additional device
in between, the picture quality may be poor
because of the copy protection system built
into the recorder.
A
B
C
D
pg001-pg080_RTH718_eng_98.indd 23pg001-pg080_RTH718_eng_98.indd 23 2006-10-20 10:41:54 AM2006-10-20 10:41:54 AM