Philips RTH718 Ventilation Hood User Manual


 
English
72
Radio Reception
Tuning to radio stations
A
Press FM/AUX on the remote to select
FM tuner source.
B
Press and hold  on the remote and
release the button.
The radio automatically tunes to a
station with suf cient reception.
C
Repeat step 2 if necessary until you  nd
the desired station.
To tune to a weak station, press  on
the remote brie y and repeatedly until
you have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM
radio stations in the memory.
Automatic programming
Press SELECT on the remote for more
than three seconds to activate
programming.
All available stations are programmed.
“AUTO” is displayed and available
stations are programmed in order of
waveband.
Manual programming
A
Tune to your desired station (refer to
“Tuning to radio stations”).
B
Press SELECT to activate programming.
“P01”  ashes on the display.
C
Press
the numeric keypad 0-9 to allocate
a number from 1 to 20 to this station.
D
Press SELECT again to con rm the
setting.
E
Repeat the above four steps to store
other stations.
You can override a preset station by
storing another frequency in its place.
Tuning to preset radio
stations
A
Press CH +/- until the desired preset
station is displayed.
pg001-pg080_RTH718_eng_98.indd 72pg001-pg080_RTH718_eng_98.indd 72 2006-10-20 10:42:48 AM2006-10-20 10:42:48 AM