Filter
Top Products
English
44
About timer recording
Use ‘Timer Recording’ to automatically
start and stop a recording at a later
date/ time. The recorder will tune to the
right program channel and begin
recording at the speci ed time.
With this recorder, you can pre-program
up to 20 recordings.
To make a timer recording, your
recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The mode of record quality, see
“Before Recording - GENERAL
settings”.
OK
SELECT
TIMER
Timer recording (G-CODE
®
System)
This is a simple programming system for
recorders. To use it, enter the G-CODE
®
programming number associated with
your television program. You can nd
this number in your TV listings magazine.
All the information needed by the
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
If you are recording directly to a
DVD disc, insert the DVD recordable
disc before proceeding to step
B
.
B
Press TIMER on the remote control.
The timer schedule list appears.
1
2
3
4
5
6
Sourc
e
R
ec
M
ode
D
a
t
e
Star
t
En
d
R
ec
T
o
Timer Schedule
C
Use keys to highlight the next
available empty slot and press OK.
The G-CODE
®
System setup menu
appears.
Enter the G-
CODE
programming
number for the show you wish to
record. Press CANCEL for manual
timer recording. To go back to timer
schedule press [RETURN].
OK
CONFIRM
OK
MANUAL
G-
CODE
System
TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD.
Timer Recording
pg001-pg080_RTH718_eng_98.indd 44pg001-pg080_RTH718_eng_98.indd 44 2006-10-20 10:42:16 AM2006-10-20 10:42:16 AM