Filter
Top Products
English
35
Before Recording (continued)
TIPS: Press to go back to previous menu item.
Press SETUP to exit the menu.
HDD settings (underlined options are the factory default settings)
This option allows you to control the behavior of the Time Shift
Buffer.
{ Yes } – Select to retain the contents in the temporary HDD
storage when you switch the tuner’s TV channel or
external video input source.
{ No } – Select to clear the contents in the temporary HDD
storage.
Press OK to display information on:
– Hard disk size in MB ( Megabytes).
– Used space in MB ( Megabytes).
– Remaining space in MB ( Megabytes).
– Number of titles stored on the HDD.
This option determines how the recorder will respond when
the HDD is full of recordings.
{ Automatic }–During recording, when the HDD is full, the
recorder will proceed to overwrite any unprotected
recordings in the HDD. The oldest unprotected
recordings will be deleted rst.
{ Manual } – During recording, when the HDD is full, recording
will be stopped. A warning message { The hard disk
is full. Please erase some programs to allow
further recording. } will appear on the screen.
This option will erase all marked/ unmarked recordings on the
HDD. This option is not available when recording to HDD is in
progress.
Press to highlight OK.
A warning message will appear. Select
OK
OK
to proceed or
OK
CANCEL
to abort. Once complete, the recorder will switch to standby mode.
This option will erase all content on a DVD±RW disc, including
those that were not recorded on this recorder. This option
is only available in tuner mode.
Press to highlight OK.
A warning message will appear. Select
OK
OK
to proceed or
OK
CANCEL
to abort.
Save Time Shift
Buffer
HDD Info
Space Management
Delete HDD
Delete Optical Disc
pg001-pg080_RTH718_eng_98.indd 35pg001-pg080_RTH718_eng_98.indd 35 2006-10-20 10:42:07 AM2006-10-20 10:42:07 AM