Filter
Top Products
17
5. Remove existing bottom hinge (3 screws) and remount on
opposite side TOP. Remove hinge screw pin.
6. With bottom of door facing up, remove pivot plate (2 screws), flip
over, and remount on opposite side of door (Figure 17).
Figure 17
7. Holding door upright with top of
door tilted forward, place hole of
door pivot plate on bottom hinge
screw pin (Figure 18). Be sure
that the bosses on the closers
align with holes in hinge and hinge
plate.
8. Tilt top of door into position in top
hinge and install top hinge screw
pin.
9. Install plastic screw plugs
removed in Step 2 in old hinge
holes (3 each, top and bottom).
UL319
BOSS
CLRCO008
Figure 18
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 17