Filter
Top Products
32
User’s Manual
1. Remove the screws at each end of the grille.
2. Remove the grille.
DO NOT touch the condenser fins. The condenser fins are
SHARP and can be easily damaged.
DO NOT use any type of cleaner on the condenser unit.
3. Clean the condenser coil using a soft brush with a “combing” action
or vacuum cleaner. Do not touch the condenser coil.
4. Position the grille to align the screw holes with the cabinet.
5. Insert the grille screws and tighten. Do not overtighten.
SELF CLEANING CYCLE — EVERY 6 MONTHS
To maintain operational efficiency, clean the unit every six months
(depending on water conditions, more or less frequent cleaning may be
necessary). If the ice maker requires more frequent cleaning, consult
a qualified plumber to test the water quality and recommend appropri-
ate treatment.
Wear rubber gloves and safety goggles and/or
face shield when handling Ice Machine Cleaner.
Use only U-Line Ice Machine Cleaner (part number 41978).
It is a violation of Federal law to use this solution in a man-
ner inconsistent with its labeling. Use of any other cleaner
can ruin the finish of the evaporator and will void the war-
ranty. Read and understand all labels printed on the pack-
age before use.
CAUTION
!
WARNING
CAUTION
!
WARNING
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 32