Filter
Top Products
UL208
FRONT COVER
Figure 37
CLRCO012
OVERFLOW
Figure 38
33
Ice machine cleaner is used to remove lime scale and other mineral
deposits. Refer to the following steps for mineral deposit removal.
The refrigerator side does not operate during the ice maker
cleaning cycle. Remove all fresh food to prevent spoilage.
CAUTION
Never use anything to force ice from the evaporator.
Damage may result.
Always remove perishables before
cleaning.
1. Set the cycle selector switch
to OFF and allow the ice to
melt off of the evaporator.
2. Remove all ice from the
storage bin.
3. Remove inside front cover
(Figure 37).
4. Remove the overflow tube
by lifting it up while using
a slight back and forth
motion to loosen it from the
drain hole (Figure 38). The
water in the reservoir will
flow down the drain.
5. Replace the overflow tube
after all of the water has
drained from the reservoir.
6. Move the cycle selector
switch to the CLN position.
7. When water begins to flow
over the evaporator (approxi-
mately 3 minutes), add
one package of U-Line Ice
Machine cleaner to the
water reservoir.
8. Reinstall inside front cover.
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 33