U-Line CLRCO2075 Ice Maker User Manual


 
STORAGE, VACATION AND MOVING
If the unit is to be stored, moved or not used for extended periods, it
will be necessary to drain the system of water.
Electrical Shock Hazard. Disconnect power
before servicing. Before operating replace all
panels. Failure to do so can result in death or
electrical shock.
1. Disconnect power from the unit.
2. Remove ice from the storage bin.
3. Shut off water supply at the main water source.
4. Disconnect the inlet and outlet lines and allow them to drain.
If the ambient temperature is expected to drop below 40°F,
drain all water from the unit to prevent freezing damage not
covered by the warranty.
NOTE
The use of anti-freeze or other products of this nature is not
necessary and is not recommended.
5. Disconnect inlet and outlet lines to the water valve.
6. Drain water from the water trough and drain line by removing the
overflow tube (Figure 41).
!
WARNING
!
WARNING
37
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 37