Filter
Top Products
Problem Possible Cause Remedy
Unit produces Low water level. Check to see that
shallow or overflow tube is fully
incomplete cubes, seated.
or the ice fill
Hot incoming water. Connect the unit to a
pattern on the
cold water supply.
evaporator is
Refer to INSTALLATION.
incomplete.
Incorrect incoming Water pressure must
water pressure. be 20-120 psi.
Unit is not level. Refer to LEVELING THE
UNIT.
Water leaking Supply line leaking. Check to see that water
from under the inlet line is attached
unit. properly. Refer to
CONNECTING THE
WATER SUPPLY.
Bin drain leaking. Check integrity of bin
drain hose and clamp.
Ice storage bin Obstructed drain. Check to see that
full of water. storage bin drain
opening is free from
obstruction and debris.
IF SERVICE IS REQUIRED
If the need for service arises, contact the dealer from whom the unit
was purchased. State the Model Number and Serial Number and
explain the problem. The Model and Serial Number plate is located
inside unit at upper right hand corner.
If you do not know the name of the selling dealer or local service
company, you can check online at www.U-LineService.com
42
User’s Manual
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 42