Filter
Top Products
34
User’s Manual
9. When the self-cleaning process stops (approximately 45 minutes),
clean the storage bin.
10. Wipe down the interior and storage bin with a solution of non-
abrasive mild soap or detergent and warm water. Rinse with
clean water.
11. Sanitize the bin with a solution of 1 tablespoon of bleach in 1
gallon of warm water. Rinse thoroughly with clean water.
12. Move the cycle selector switch to the ON position to resume ice
production.
Repeat the steps in Initial START-UP to check the draining system
and discard the first ice harvest.
NOTE
Ice production after the first harvest may take longer
after Self Cleaning Cycle since the refrigeration portion
will take precedence over producing ice to protect any
perishables. Once the refrigerator reaches a set tempera-
ture, ice making will resume to normal.
30005_CLRCO2075 User Manual 8/22/03 4:24 PM Page 34