Filter
Top Products
Chapter 2
Installing Valves in the Heated Oven Valve Installation
Operating Manual 27
Figure 2-5. Installing the actuator to the valve standoff
Step 6. Testing the Valve
1. Configure the valve and rotate it clockwise and counter-clockwise. Refer to
Chapter 3, Operation for more information.
2. Ensure that the valve moves freely in both directions.
3. Refer to Figure 2-3 and inspect the valve stop when the valve is in both
positions to ensure that the stop is at the travel limit on each side.
1. Valve
2. Mechanical Stop Valve
3. Valve Standorf
4. M4 x 10 mm Screws
5. Collar “A”
6. Collar Set Screws
7. Heater Plate
8. Collar “B”
9. Actuator
10 Square Nut
1
2
3
4
5
6
7
8
9
10