Filter
Top Products
Chapter 2
Configuring Valves Valve Installation
Operating Manual 33
2. Scroll to Valves and press ENTER.
3. Select
Valve #1 and press ENTER.
• If you want valve #1 to be a gas sampling valve, select
Gas sampling.
• If you want valve #1 to be a switching valve, select
Switching.
4. Press ENTER.
5. Press CLEAR to return to the
Configure Valves menu.
6. Repeat as necessary for the remaining valves in the Valve Oven or valve
compartment.
Figure 2-8. Mechanical Stop Positions for Switching Valves
Mechanical stop
C
lockwise (CW) Position
Counterclockwise (CCW) Position