Filter
Top Products
Chapter 3
Operating Valves Automatically Operation
Operating Manual 41
If you want the valve to switch back before the end of run, press CLEAR to return
to the
SELECT PARAM to add menu and select the same valve again. Press
ENTER. Type the desired switching time and press ENTER. Select the position the
valve is to return to by selecting ON or OFF and press ENTER. With no run table
entries selected, press CLEAR multiple times to exit to the run event table.
OPERATING PROCEDURE
Heating the Valve Oven
1. On the TRACE GC Ultra keypad, press AUX.
2. Scroll to
Temperature Zones and press ENTER.
current value target value
3. Enter the target temperature and press ENTER.
NOTE Press INFO to determine temperature limits.
AUXILIARY ZONE
Valve oven 43 175