Filter
Top Products
15
USING YOUR RANGE
Command pads
The command pads tell the oven what to
do and in what order. Some command pads
have an Indicator Light. The Indicator Light
comes on when you press the command
pad. The ON Indicator Light comes on
when you press START/ENTER for an oven
function.
Using the control lock
The control lock prevents unwanted use of
the oven by disabling most of the control
panel command pads (except CLOCK and
TIMER SET/OFF).
NOTES:
• Control lock is only available when oven
is not in use or control has not been set.
• Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
Starting a function
After programming a function, you must
press START/ENTER to start the
function. If you do not press
START/ENTER within 5 seconds
of programming, “START?” will
show on the display as a reminder. The
control will return to time of day mode after
5 minutes if START/ENTER is not pressed.
Canceling a function
OFF/CANCEL will cancel any function
except for the Clock and Timer Set
functions. When you press
OFF/CANCEL, the display will
show the time of day or, if Minute
Timer is also being used, the time remain-
ing. To cancel the Minute Timer, see “Using
the electronic Minute Timer” section.
OFF
CANCEL
To lock or deactivate the control panel:
Press and hold START/ENTER for 5
seconds. A single tone will sound
and “Loc” and will appear on the
temperature display. When the
control is locked, “START?” will
appear on the display if you press any
command pad.
To unlock the control panel:
Press and hold START/ENTER for 5
seconds. A single tone will sound
and “Loc” and will disappear from
the temperature display.
NOTE: You may hear a fan blowing in
the oven even after you press OFF/CANCEL.
This is the cooling fan. It will turn off when
the oven cools down.
START
5 SEC
ENTER
START
5 SEC
ENTER
START
5 SEC
ENTER
3191537v08c75 9/1/98 2:32 PM Page 15