Filter
Top Products
18
USING YOUR RANGE
To choose between high and low
volume signals:
Press and hold DELAY START TIME for 5
seconds. A short tone will sound to
tell you the signals have been
changed. “HI” or “LO” will appear on
the time display to show the volume
you chose. If the volume is changed while
the audible signals are off, when signals are
turned back on they will be at the volume
setting chosen.
4. Turn off Minute Timer.
To cancel the Minute Timer:
Press TIMER OFF.
Disabling the timer
reminder tones:
NOTE: To disable the reminder tones,
press and hold TIMER SET for 5 seconds.
To enable the tones, follow the same step.
After disabling or enabling reminder tones,
a single tone will sound and the display will
return to the Minute Timer countdown or the
time of day display.
Audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To shut off all signals except for error
tones and the hidden function signal:
Press and hold STOP TIME for 5 seconds.
A short tone will sound to tell you
the signals have been changed.
Repeat the above step to turn the
signals back on.
PRESS YOU SEE
PRESS YOU SEE
(time of day)
(time of day)
TIMER
OFF
TIMER
OFF
STOP
TIME
DELAY
START
TIME
3191537v08c75 9/1/98 2:32 PM Page 18