Filter
Top Products
5. Touch START. The TIME COOK 1 Indicator
will flash to show that the oven is cooking. The
Display counts down the time to show how
much cookfng time is left in the cycle. When
the cooking time ends, four tones will sound.
The Display will then show ‘END’.
To check Cook Power after
cooking has started:
Touch POWER LEVEL. The Cook Power
percentage or “HI” will show in the Display for
three seconds.
To change Cook Power after
cooking has started:
l
Follow Steps 3 and 4 above to set a Cook
Power lower than HI.
l
Touch POWER LEVEL twice to change from a
lower Cook Power to HI.
Cooking with more than one cook cycle
For best results, some recipes call for one Cook
Power for a certain length of time, and another
Cook Power for another length of time. Your oven
can be set to change from one to another
automatically.
1.
Put food in the oven and close the door.
2. Touch Number Pads for the cooking time you
want in the first cycle. The Display will show
the numbers you touched
in the order you
touched them
This example shows 7
minutes, 30 seconds.
3.
Select a Cook Power.
l
lf you want to cook at full41 00%) power,
skip to Step 4.
*To select a Cook Power other than full
power, touch POWER LEVEL, followed by
a Number Pad for the Cook Power you
want in the first cycle. This example shows
you touched Number Pad 5 for 50% of full
power.
4. Touch TIME COOK 2 to set the second cycle.
The TIME COOK 2 Indicator will flash.
uuu
14