Filter
Top Products
Operating instructions
9
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
"Setting of the water softener"
"End of programme"
"Something not working with the machine"
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
1. Press the On/Off push button. All programme selection push
buttons indicator lights will illuminate (setting mode).
If only one programme selection push button indicator light is
illuminated, this means that a washing programme has been
selected.
The programme must be cancelled: press simultaneously the
function push buttons 2 and 3 for about 2 seconds, the indicator
light of the setted programme push button starts flashing for
about 2 seconds.
After about 2 seconds the indicator lights of all the programme
selection push buttons will illuminate indicating that the setted
programme has been cancelled and that the machine is now in
setting mode.
2. Press simultaneously function push buttons 2 and 3, the indicator
lights of the function push buttons 1, 2 and 3 start flashing.
3. Press the function push button 3, the indicator lights of function
push buttons 1 and 2 turn off while the indicator light of the push
button 3 goes on flashing, at the same time the "end of
programme" indicator light illuminates indicating that the audible
signals are active.
4. To deactivate the audible signals, press again the function push
button 3, the "end of programme" indicator light turns off,
indicating that the audible signals have been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off push button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
152965 29/0en 11-02-2004 10:13 Pagina 9