Filter
Top Products
11
OPERATING YOUR BREVILLE PRODUCT
NOTE
Pouring the mixture into the freezer
bowl before starting the mixer
may cause the mixture to freeze
prematurely.
4. Mix the ice cream/frozen dessert until it
has reached the desired consistency.
NOTE
If adding mix-ins (chocolate pieces,
nuts, etc) to ice cream/frozen
desserts, it is suggested that these
be added to the mixture at least 15
minutes after the churning processes
has begun.
NOTE
You can monitor the time that the ice
cream has been churned by watching
the Count-Up Timer. You can also set
the Count-Down Timer on the mixer
to the desired mixing time specified
by the recipe. If longer mixing times
are required, you can reset the time on
the mixer if needed.
Press and hold the arrows to scroll
through the timer setting more quickly.
DISASSEMBLING THE
FREEZE & MIX™
1. One the churning process is complete
and the ice cream/frozen dessert has
reached the desired consistency, turn the
Speed Control Dial to the OFF/STAND
BY position and remove the power cord
from the power outlet.
2. Remove splash guard if assembled.
3. Raise the mixer motor head by
depressing the TILT-RELEASE button
and lift the mixer motor head up until
it tilts back and locks into the open
position.
NOTE
When lowering or lifting the mixer
motor head, always support the motor
head with your other hand to prevent
from free-falling.
4. Remove the Scraper Paddle by holding
the mixer motor head and pressing the
Scraper Paddle upwards on the spindle.
Turn the Scraper Paddle anti-clockwise
to release it from the pin on the spindle.
5. Use a plastic spatula to remove the
excess ice cream/frozen dessert from the
Scrapper Paddle.
6. Remove the freezer bowl from the
indented bowl locking recess of the
mixer base and turn anti-clockwise until
the bowl releases.
BIA500XL_IB_C12_FA.indd 11 17/04/12 11:16 AM