Filter
Top Products
Page 15
PROGRAMMING FUNCTIONS - LEVEL I
BREW LOCKOUT
This function allows the operator to prevent or allow brewing if the water temperature is less than the set READY
temperature.
Procedure for setting Brew Lockout:
1. To access this function screen press and hold the right hidden button. Release when the display reads:
PROGRAMMING THE BREWER (cont.)
2. The YES or NO should be flashing. Select YES to prevent brewing if the water temperature is below the set
READY temperature. Select NO to permit brewing at any water temperature.
3. When finished, press and release DONE. This will exit this function screen and return to the MAIN SCREEN
on the display.
Press here
for NO
Press here
for YES
Press here
for DONE
BREW LOCKOUT?
NO DONE YES
40119 071107