Filter
Top Products
Page 21
BREW SETTINGS (cont.)
Procedure to set or modify % Bypass settings.
Range: 0 to 90% for both batch sizes
1. Press and hold the right hidden button until display
reads SET LANGUAGE. Press the right hidden but-
ton until display reads BREW SETTINGS ?.
2. Press YES to proceed. The display should now
read LEFT SIDE, along with MODIFY, SHOW and
NEXT.
3. Press and release the right hidden button until
display reads % BYPASS XXX.X. A batch light will
be blinking.
4. Using (-) and (+), set the amount of bypass water
(percentage) to be dispensed around the gounds
for that particular batch size.
5. When finished, press the other batch size and repeat
step 4.
6. When finished setting both batch sizes, press DONE.
The display should read 2 BATCHES DONE?
7. If both batch sizes are not correct, press NO to
return to the % BYPASS: setup screen and repeat
steps 4, 5 and 6.
8. If both batch sizes are correct, press YES. This will
advance to L BREW METER. To exit to the MAIN
SCREEN, press and release either ON/OFF button.
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
BREW SETTINGS ?
NO YES
% BYPASS XXX.X
(-) DONE (+)
L BREW METER X
-
I +
LEFT SIDE
MODIFY SHOW NEXT
PRESSING NO WILL
ADVANCE TO NEXT
FUNCTION SCREEN
2 BATCHES DONE ?
NO YES
PRESS AND RELEASE
RIGHT HIDDEN SWITCH
UNTIL DISPLAY READS:
SET BOTH
BATCH SIZES
40119 071107