Filter
Top Products
Page 32
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
BREW COUNTERS
This function allows the operator to track the total num-
ber of brew cycles completed, as well as the number of
batches brewed using each of the brew buttons. There
are four resettable counters, and one life counter that
is not resettable.
Procedure to view/reset the brew counters:
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until the display reads BREW COUNTERS.
2. Pressing NO will advance to the next programming
function, ENABLE ADS ?. Press YES to view the first
brew counter (TOTAL LIFE BREWS). This number
represents the total number of brew cycles this
brewer has completed. This counter is non-reset-
table. Press NEXT to advance to the next brew
counter, <- <- BREW FULL (left side).
3. This counter represents the number of brews for
aFull Brew on the left side of the brewer. To reset
the counter to zero, press and release RESET. Press
and release NEXT to advance to the next counter.
4. Repeat step 3 for the remaining left counter, BREW
HALF.
5. Repeat step 4 for the two right side brew coun-
ters.
6. When finished, press NEXT to advance to the next
programming function, ENABLE ADS ?. To exit
programming, press and release either ON/OFF
button to return to the MAIN SCREEN.
TOTAL LIFE BREWS
XXXX NEXT
BREW COUNTERS?
NO YES
<- <- XXX BREW FULL
RESET NEXT
<- <- XXX BREW HALF
RESET NEXT
ENABLE ADS ?
NO YES
PRESSING NO WILL
ADVANCE TO
ENABLE ADS ?
BREW FULL XXX -> ->
RESET NEXT
BREW HALF XXX -> ->
RESET NEXT
40119 071107