Filter
Top Products
Page 25
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
DRIP TIME
This function allows the operator to adjust the DRIP
TIME (time from end of sprayhead flow to when liquid
stops dripping from the funnel). When the brew cycle
is complete, the display will show DRIPPING and will
countdown the time until the funnel empties.
Setting DRIP TIME:
Range: OFF to 5 minutes for both batch sizes.
NOTE: If the brewer is already in the DRIP TIME screen,
skip steps 1 through 9 and proceed directly to step
10.
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until display reads BREW SETTINGS ?.
2. Press YES to proceed. The display should now read
LEFT SIDE, along with MODIFY SHOW NEXT.
3. Press and release the right hidden button until
display reads DRIP TIME: X:XX. A batch light will
be blinking.
4. Using the (-) and (+), set the amount of time from
when the brew solenoid shuts off to when drip-out
occurs for that batch size.
5. When finished, press the other batch size and repeat
step 4.
6. When finished, press DONE. The display should
read 2 BATCHES DONE?
7. If both batch sizes are not correct, press and release
NO to return to the DRIP TIME setup screen and
repeat steps 4, 5 and 6.
8. If both batch sizes are correct, press YES. The
display should read LEFT SIDE SETUP COMPLETE.
After a 5 second delay, the display will advance to
REVIEW SETTINGS ?.
9. Press YES to scroll through all left brew settings. If
all brew settings are correct press NO. The display
should read COPY SETTINGS ?.
10. If NO is pressed, display will advance to RIGHT
SIDE, along with MODIFY SHOW NEXT; proceed
to step 13. If YES is pressed, display should read
LEFT->->->-> RIGHT
11. If NO is pressed, display will advance to RIGHT
SIDE, along with MODIFY SHOW NEXT; proceed
to step 13. If YES is pressed, display should read
ARE YOU SURE ?.
12. If NO is pressed, display will advance to RIGHT
SIDE, along with MODIFY SHOW NEXT. If YES is
pressed, display should read PLEASE WAIT, along
with COPYING L ->->->-> R. After a short delay
display will read RIGHT SIDE, along with MODIFY
SHOW NEXT.
13. If left settings were copied to the right side press
NEXT to advance display to XXX REFILL XXX. If
left brew settings were not copied to the right side,
press MODIFY and repeat the BREW SETTING pro-
cedure used to set the left side. To exit to the MAIN
SCREEN, press and release either ON/OFF button.
BREW SETTINGS (cont.)
40119 071107