Filter
Top Products
11
Figure 1.9
=
=
570.5 m
m
ANTI-TILT BRACKET
1. The anti-tilt bracket has to be attached as shown on figure below, it has to be fixed
on the floor and on the rear wall by no. 4 (four) suitable screws (not supplied).
2. After fixing the anti-tilt bracket, slide cooker into place. Be sure the rear right foot
slides under the anti-tilt bracket attached.
Dotted line showing the position
of the cooker when installed
ANTI-TILT BRACKET
FIXING
Foot of
cooker
Anti-tilt
bracket
■ WARNING: In order to prevent accidental tièpping of the appliance, for
example by a child climbing onto the open oven door, the stabilizing means
must be installed. Please refer to instructions for installation.