Filter
Top Products
6
Figure 1.1
Figure 1.2
CONNECTING THE FEEDER
CABLE
To connect the feeder cable to the cooker it is
necessary to:
■ Remove the 6 screws that hold shield A
behind the cooker.
■ Open completely the cable clamp D.
■ Position the U bolts onto terminal block
B (fig. 1.1 - 1.2).
■ Insert the feeder cable into the cable
save P. The supply cable must be of a
suitable size for the current requirements
of the appliance.
■ Connect the phase and earth cables to
terminal B.
■ Pull the feeder cable and block it with
the cable clamp D
■ Re-mount shield A.
N.B. The earth conductor must be left
about 3 cm longer than the others.
P
D
A
B
PE
12345
N (L2)L1
230 V - 240 V
230 V3 - 240 V3
PE
12345
PE
12345
PE
12345
400 V 2N - 415 V 2N
400 V 3N - 415 V 3N
L1 L2 L3
N
L1 L2 L3
N
L1 L2
FEEDER CABLE SECTION
type “H05RR-F”
230-240 V 3 x 6 mm
2
(**)
230 -240 V3 4 x 4 mm
2
(**)
400 -415 V 3N 5 x 2,5 mm
2
(**)
400 -415 V 2N 4 x 4 mm
2
(**)
(**) – Connection with wall box con-
nection
– Diversity factor applied