Filter
Top Products
16
LUBRICATION OF THE GAS TAPS
■ If the gas tap becomes stiff, it is necessary to dismantle it carefully and clean it
with petroleum spirit. Specialist high temperature resistant grease should be
used to lubricate the tap before replacing.
■ The operations must be carried out by an authorised person/service agent.
TABLE FOR THE CHOICE OF THE INJECTORS
Natural gas Propane gas
Test Point Pressure [kPa] 1.0 2.75
BURNER
Auxiliary (A) 0.85 3.60 0.53 3.60
Semi-rapid (SR) 1.12 6.30 0.70 6.30
Rapid (R) 1.45
10.30
0.91 10.80
Triple ring (TC) 1.65
13.30
0.95 11.90
Gas
Consumption
[MJ/h]
Injector
Orifice Dia.
[mm]
Gas
Consumption
[MJ/h]
Injector
Orifice Dia.
[mm]
Figure 1.15