Filter
Top Products
48
AUTOMATIC OVEN COOKING
To cook food automatically in the oven, it is necessary to:
1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven cooking program.
These operations are performed as follows:
1.Set the length of the cooking time by pushing the button and the button to
advance, or to go back if you have passed the
desired time (fig. 6.7).
The AUTO and the symbol will be on.
2.Set the end of the cooking time by pressing the button (the cooking time already
added to the clock time will appear), and the button (fig. 6.8); if you pass the
desired time you may get back by pushing the button.
After this setting, the symbol will go off. If after this setting, the AUTO flashes on
the panel and a buzzer sounds, it means there was an error in the programming. In
this case, modify the end of cooking time or the cooking time itself by following
again the mentioned instructions above.
3.Set the temperature and the cooking program by using the switch and thermostat
knobs of the oven (see specific chapters).
The oven is now set to turn on and off at the programmed times.
During cooking, the symbol remains on. By pushing the button you can see the
time that remains until the end of cooking.
The cooking program may be cancelled in any time by pushing .
At the end of the cooking time the oven will turn off automatically, the symbol will
turn off, AUTO will flash and a buzzer will sound, which can be turned off by push-
ing any of the buttons.
Turn the temperature and thermostat knobs to zero and set the programmer to “manu-
al” by pressing the button.
Attention: A power failure makes the clock go to zero and cancels the set programs.
After a power failure, three zeros will flash on the panel.