Filter
Top Products
47
A
U
T
O
ELECTRONIC TIMER
The timer program consists only of a buzzer which may be set for a maximum period
of 23 hours and 59 minutes.
If AUTO is flashing on the panel, push the button.
To set the time, push the button and the or until you obtain the desired
time in the panel (fig. 6.6).
Having finished the setting, the clock hour will appear on the panel and the
symbol will be lighted.
The countdown will start immediately and may be seen at any moment on the panel
by simply pressing the button .
At the end of the time, the symbol will be switched off and an intermittent buzzer
will go off; this can be stopped by pressing any of the buttons.
Figure 6.6
SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL
The selection from 3 possibilities of sound can be made by pressing the button.