Filter
Top Products
Using the System Diagnostics Program
When you start the System diagnostics, the
computer
checks:
l The setting of the monitor switch (for monochrome or color)
l The positions of the internal jumpers
l The peripheral devices that are connected to the system.
After these items are checked, you see a list of the devices available for
testing. This list includes only the devices that are installed in the system.
The list looks something like this:
The following devices have been installed
DEVICE LIST
1
- System board
2
- Memory
3
- Keyboard
5
- Color graphics adapter and CRT
6 - Floppy disk drives and controller
9-
Parallel port (printer interface)
11 -
Serial port
(RS-232C
port)
14
- Dot-matrix printer
17 -
Hard disk drives and controller
Is the DEVICE LIST correct (Y/N)?
If the list correctly describes your system, press Y and then
Enter.
If a device
is missing from this list, or if you wish to change the list, press
N
and
Enter.
Note:
Once you
confirm the DEVICE LIST, you can only
test those items.
If you decide later that you need to add another device, you must
return to the main menu and re-select System diagnostics.
4-2
Diagnostics