Filter
Top Products
reliability testing of essential functions only; in most cases, running a test
only once is sufficient.
To perform the test once, press
1
and
Enter.
The program then displays
a
submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press 2 and
Enter. You
see this
prompt:
Terminate checking if an error detected (Y/N)?
Press Y and
Enter
to terminate checking if the device produces an error, or
press
N
and
Enter
to repeat the tests regardless of an error.
You see this prompt:
How many times (1-9999):
Type the
number of times you wish to repeat the test, then press
Enter.
The
tests for the device now start.
Resuming from an error
If an error occurs during a test, the test stops at that point, and an error
code and error message display. If you want to record the problem, you can
print out the message on your printer. You see this prompt:
Do you want a printout of the error message(s)
(Y/N)?
To continue without printing the error message, press
N
and
Enter.
Before you request a printout, be sure your printer is turned on and
on-line, and the paper is installed correctly. Then press Y and
Enter.
If the
printer is not ready, the following message and prompt display:
Printer is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the problem and press Y and
Enter
to continue printing, or press
N
and
Enter
to cancel printing.
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to return to the
menu.
Diagnostics
4-5