INTEGRATED
This Option is not available on the Integrated
Models.
PREFINISHED
1. Enter the Option Adjustment Mode as
explained previously.
2. Press the START/PAUSE button until letters
“dS” appear on the Electronic Display.
3. Press the LOCK button to turn the Clean
Dish Indicator on or off. When the Clean
Dish Indicator has been turned on, the brush
symbol is present on the Electronic Display.
4. Press the POWER button to return to the
Normal Operating Mode.
HOW TO CHANGE THE CLEAN DISH INDICATOR
Examples of where this feature might be beneficial are when
dishes have been left in the
and you cannot
remember if they have been washed or in situations where
household members regularly remove a few clean dishes
without emptying the remaining Drawer.
When the
leaves the factory it is programmed
with the Clean Dish Indicator off. When the wash program has
finished, the “End of Program” symbol will remain on until
the
is opened. Once the is opened, it
will return to the Normal Operating Mode.
If the Clean Dish Indicator is chosen, the “End of Program”
symbol will remain on to indicate the dishes are clean.
When you have unloaded the clean dishes or putting in dirty
dishes into the
, press the POWER button. The
will return to the Normal Operating Mode, this
could be used to indicate that dirty dishes are in or can be
loaded into the
.
NOTE: We do not recommend the Clean Dish Indicator be
used in conjunction with the Closed Drawer Option.
Clean Dish On
Clean Dish Off
Electronic Display
PREFINISHED
1. Enter the Option Adjustment Mode as explained
previously.
2. Press the START/PAUSE button until letters "EC"
appear on the Electronic Display.
3. Press the LOCK button to turn the End of Wash
Program Beeps on or off as desired. The brush symbol is
not present on the Electronic Display when the End of
Wash Program Beeps have been turned off.
4. Press the POWER button to return to the Normal
Operating Mode.
INTEGRATED
1. Enter the Option Adjustment Mode as explained
previously.
2. Press the START/PAUSE button twice. The light
above the START/PAUSE button will be green and the
light above the LOCK button will be red. If it is not,
press the POWER button and start again.
3. Press the LOCK button to turn the End of Wash
Program Beeps on or off. If all the red lights on the
wash program indicator are off then the End of Wash
Program Beeps are off.
4. Press the POWER button to return to the Normal
Operating Mode.
HOW TO CHANGE THE END OF WASH PROGRAM BEEPS
The factory has programmed the
to beep six times at the end of the wash program. This feature
can be turned off as desired.
Beeps On
Beeps Off
Electronic Display
Beeps On
Beeps Off
15
PREFINISHED
1. Enter the Option Adjustment Mode as explained
previously.
2. Press the START/PAUSE button until the letters
"Ld" appears on the Electronic Display.
3. Press the LOCK button to turn the Closed Drawer
Option on or off. The brush symbol indicates the
Closed
option is selected.
4. Press the POWER button to return to the Normal
Operating Mode.
INTEGRATED
1. Enter in the Option Adjustment Mode as explained
previously.
2. Press the START/PAUSE button three times. The light
above the START/PAUSE button and the LOCK button will
be red. If the light is not red, press the POWER button to
return to the Normal Operating Mode and start again.
3. Press the LOCK button to turn the Closed Drawer feature
on or off. If all the red lights on the wash program indicator
are on then the Closed Drawer feature is on.
4. Press the POWER button to return the Normal Operating
Mode.
HOW TO CHANGE THE CLOSED DRAWER OPTION
When the Closed Drawer Option has been selected it will keep the
locked at all times. When you
wish to open the
press the POWER button. When the is fully closed again, the lid will
automatically come down after 30 seconds and lock the
. NOTE: If the Lock feature is used in
conjunction with the Closed Drawer Option, pressing the POWER button will not open the
.
The Lock feature must be turned off to enable the
to be opened.
Electronic Display
Closed
Drawer On
Closed
Drawer Off
Closed Drawer On
Closed Drawer Off