Filter
Top Products
9
1.6 Notes on Handling the Emulation Pod
1.6 Notes on Handling the Emulation Pod
When handling the product, observe the precautions below.
■ Notes on Handling the Emulation Pod
Before connecting or disconnecting cables, turn off the power to the
emulation pod and connected devices, and disconnect the power plug
from the receptacle.
Failure to do so may cause an electric shock.
Do not put your fingers in the connector inlet.
Putting your fingers in the connector inlet can result in an electric
shock or failure.
If you hear thunder, disconnect the power plug from the receptacle.
Using the emulation pod during a thunderstorm can damage the
emulation pod or cause a fire.
Never open the emulation pod case. Do not modify the emulation pod
without permission.
Opening the case or modifying the emulation pod may cause a failure,
fire, or electric shock.
Do not use the emulation pod in a wet area such as a bathroom or
shower room.
Using the emulation pod in a wet area may cause a failure, fire, or
electric shock.
WARNING
Electric shock
Plug
No disassembly
No moisture