Filter
Top Products
29
2.10 Power-off Sequence
2.10 Power-off Sequence
Turn off the power of the user system, emulation pod, and host machine in this
sequence.
■ Power-off Sequence
Turn off the power using the sequence shown in 2.10-1 "Power-off sequence".
Figure 2.10-1 Power-off sequence
To turn off the power of the emulation pod, press the power switch on the rear of the 2140 main
unit toward the "0" side.
When turning off the power, follow the procedure described in the
manual.
Failure to do so may cause a device failure.
CAUTION
Prohibition
Turn off the power to the user system.
Turn off the power to the emulation pod.
Turn off the power to the host machine.