Filter
Top Products
17
2.2 Connecting the 2140 Main Unit
2.2 Connecting the 2140 Main Unit
Connect the three main unit interface cables to the main unit interface cable
connectors on the back of the emulation pod as shown in Figure 2.2-1 "Connecting the
2140 main unit".
■ Connecting the 2140 Main Unit
Before connecting or disconnecting a cable, turn off the power.
Failure to do so may cause an electric shock.
When disconnecting a cable, hold the cable by the connector case. Do
not pull on the cable.
Doing so may break s wire in the cable.
CAUTION
Prohibition