Filter
Top Products
27
2.8 Switching the C-pin Circuit Connection
2.8 Switching the C-pin Circuit Connection
Set the jumper switch for the C-pin circuit connection according to whether there is a
C-pin on the evaluation MCU.
■ Switching the C-pin
Set the C-pin switch depending on whether there is a C-pin on the evaluation MCU. Make the
setting according to Table 2.8-1 "Jumper switch for setting the C-pin circuit connection".
Figure 2.8-1 Jumper switch and C-pin circuit connection
Before setting the jumper switch for the C-pin circuit connection, turn
off the power.
Failure to do so may cause an electric shock.
CAUTION
Prohibition
Table 2.8-1 Jumper switch for setting the C-pin circuit connection
C-pin function
SW1 setting
56
Yes OFF ON
No ON OFF