Filter
Top Products
19
2.3 Connecting the Probe Cable
2.3 Connecting the Probe Cable
Connect the probe cable to the probe cable connector on the top of the emulation pod
as shown in Figure 2.3-1 "Connecting the probe cable".
■ Connecting the Probe Cable
Figure 2.3-1 Connecting the probe cable
Before connecting or disconnecting a cable, turn off the power.
Failure to do so may cause an electric shock.
When disconnecting a cable, hold the cable by the connector case. Do
not pull on the cable.
Doing so may break s wire in the cable.
CAUTION
Prohibition