Filter
Top Products
23
2.6 Supplying a Clock to the Evaluation MCU
2.6 Supplying a Clock to the Evaluation MCU
Select the clock to be supplied to the evaluation MCU using the clock switch and
secondary clock supply jumper on the top of the emulation pod as shown in Figure
2.6-1 "Clock peripheral circuit" and Table 2.6-1 "Clock switching method".
■ Supplying a Clock to the Evaluation MCU
Figure 2.6-1 Clock peripheral circuit
Before operating the clock switch, turn off the power.
Failure to do so may cause an electric shock.
CAUTION
Prohibition