Filter
Top Products
10
CHAPTER 1 PRODUCT HANDLING AND SPECIFICATIONS
Do not touch the emulation pod with wet hands.
Doing so may cause an electric shock.
Do not put the emulation pod in a location with a lot of moisture, dust,
or soot or in a location with poor ventilation. Do not place the emulation
pod near an open flame.
Doing so may cause a failure, fire, or electric shock.
Do not insert or drop any metallic, combustible, or other object through
a ventilation or other type of opening in the emulation pod.
Doing so may cause a failure, fire, or electric shock.
Do not use a voltage other than the indicated power voltage. Do not
connect the power cord in a daisy chain.
Doing so may cause a fire or electric shock.
Do not damage or alter any cables.
Putting a heavy object on a cable, or pulling, forcibly bending,
distorting, or heating a cable may damage the cable and cause a fire
or electric shock.
Before moving the emulation pod, disconnect the power plug from the
receptacle.
Also, disconnect all other cables.
Watch where you step during work.
Damaging a cable may cause a fire or electric shock. A falling device
may cause injury.
If the emulation pod will not used for a long time, for safety reasons,
disconnect the power plug from the receptacle.
Failure to do so may cause a fire or electric shock.
WARNING
Prohibition
CAUTION
Plug