Filter
Top Products
v
Indicates that improper use may cause minor or moderate injury, or may
damage the emulation pod, connected equipment, data or other software
resources, or other property.
Warning Description Page
When disconnecting a cable, hold the cable by the connector case. Do not
pull on the cable.
Doing so may break a wire in the cable.
17, 19, 20
Before mounting the evaluation MCU, turn off the power.
Failure to do so may cause an electric shock.
22
Before operating the clock switch, turn off the power.
Failure to do so may cause an electric shock.
23
Before setting the jumper switch for the power supply, turn off the power.
Failure to do so may cause an electric shock.
25
Before setting the jumper switch for the C-pin circuit connection, turn off the
power.
Failure to do so may cause an electric shock.
27
When turning on the power, follow the procedure described in the manual.
Failure to do so may cause a device failure.
28
After the emulation pod power is turned on, do not turn off and turn on the
user system power.
Doing so cause a device failure.
28
When power is on, do not carry the emulation pod, or subject it to shock or
vibration.
Doing so may cause a device failure.
28
When turning off the power, follow the procedure described in the manual.
Failure to do so may cause a device failure.
29
Insert the power plug firmly in the receptacle.
Failure to do so may cause a failure or a fire.
11
The device can be damaged during transport. Store the packing materials
used to ship the emulation pod and use them if you need to transport it.
2
Using the emulation pod at an ambient temperature or humidity outside the
specified range may cause a device failure. Always use the emulation pod
within the specified temperature and humidity range.
6
CAUTION
Prohibition
Attention
Caution