Filter
Top Products
Part # 1955203 (12/06)Page 8
OPERATING INSTRUCTIONS
Master 200 Solid State Control
with Electromechanical Timer
Modes
In Off Mode
When the oven is off, there are no lights or indicators.
Start Up
Press the COOK/OFF/COOL DOWN rocker switch
to the “COOK” position. e green lamp will light
indicating the oven is powered in cook mode.
e oven will begin to heat to the temperature set on the
thermostat dial. e amber lamp will light indicating
the heat is active. As the heat cycles on and off to
maintain the set temperature this light will go on and
off accordingly.
e door must be closed for the oven to operate in cook
mode. Opening the door will cause the heat to stop and
the motor and fan will shut off. is is a safety feature.
Fan Speed
e fan speed can be either high (RPM) or
(RPM). e fan speed is controlled by the left rocker
switch marked high and low.
Lights
e oven lights are activated by pressing the light switch
on the control panel. is is a momentary switch and
the lights will stay lit as long as this button is held in the
on position. Lights will work whenever there is electrical
power connected to the oven.
Cool Down
Pressing the COOK/OFF/COOL down rocker switch
to the COOL DOWN position activates the fan and
motor to cool the oven cavity. e door must be open
slightly for the fan and motor to start. e heat is not
active in this mode.