GE 164D2966P126 Oven User Manual


 
OPEW’l”ING
THE
SELF-CLEANING OVEN
(Lolltlnlled)
After Self-Cleaning
You
may
notice
some white ash in
the
oven. Just wipe
If the oven is
not
clean
after
one
clean
cycle. repeat
it up with a damp
cloth
after
the
oven
cools.
the
cycle.
If’
white spots remain,
remove them with a
soap-
If the
shel\es
ha\e
become hard to slide, wipe the
filled
steel wool pad. Be sure to rinse thoroughly with
she]f
supports with cooking oil.
a vinegar and water mixture. These deposits are
NOTE:
No functions can be programmed
before
the
usually a salt residue that cannot be removed by the
dt,ol
..llonlatically
Lm]ocks.
clean
cycle.
How
to Set Delay Start of Cleaning
Quick Reminder:
1. Press the AUTO SELF CLEAN
pad.
2. Press the INCREASE or DECREASE pad
until the desired Clean Time appears.
3. Press the STOP TIME pad.
4. Press the INCREASE or DECREASE
pad
until
the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the
cleatl
cycle automatically at a later time than the present
time of day.
NOTE:
Before beginning, make sure the o\en
ciock
shows the correct time of day.
1.
F
O
I1
OW
the directions in the Before a Clean
Cycle section.
n
2.
After closing the door, press the
AUTO SELF
AUTO SELF CLEAN pad.
CLEAN
A
A
3. Press the INCREASE or DECREASE
pad to enter the Clean Time.
Q
4. Press the STOP TIME pad.
“SET STOP TIM E..
and
the earliest
Stop Time you can set will appear in
the display.
“rhc
earliest Stop Time will be the
Clean
Time
sclcctcd
p]LIs
the time of day.
l~or
example:
If
the Clean Time is
3
hours and the time of day
is
():()().
the Stop Time that appears in the display
will be
9:()().
(a
5. Press the INCREASE pad to
change
the
Stop Time to a later time of day
if
@
desired. For example:
If
yOLI
set the —
Stop Time at 11
:()(),
[he
oven will start
the clean cycle at
8:00
and end at
11
:()().
The door latches automatically.
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the time
for
the clean
cyc]e
is set. The words
“ON”
and
“LOCK”
will
appear in the display when the door automatically
locks.
It will
not
be possible to open the oven door
until the temperature drops below the lock
temperature and
the
LOCK light goes oft.
6.
When the LOCK
light
is off, open the door.
NOTE:
During
a delayed self-clean operation you can
find
out when the oven is set to turn on by
pressin&
and
holding the AUTO SELF CLEAN pad
for
3
seconds.
A fan may automatically turn on and off to cool
internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
32