Filter
Top Products
31
Special Features
Wall Oven
Special
features of
your oven
control
Your new touch pad control has additional features
that you may choose to use.
They remain in the control’s memory until
the steps are repeated. When the display shows
your choice, press the START pad. The special
features will remain in memory after a power
failure, except for the Sabbath feature, which will
have to be reset.
The special feature modes can only be activated
while the display is showing the time of day clock.
The following are the features and how you
may activate them.
Tones at
the end of a
timed cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous
6-second beep may be canceled. To cancel the
6-second beep:
1 Press the BAKE and BROIL HIGH/LOW
pads (on double oven models, use the upper
oven controls) at the same time for 3 seconds
until the display shows “SF.”
2 Press the TIMER ON/OFF pad. The display
shows “CON BEEP” (continuous beep). Press
the TIMER ON/OFF pad again. The display
shows “BEEP.” (This cancels the one beep
every 6 seconds.)
3 Press the START pad.
NOTE: On double oven models, this cancels the
end-of-cycle tone for both ovens.