GE Monogram ZET938 Convection Oven User Manual


 
Oven Control, Clock & Timer
Wall Oven
Features of
your oven
control,
clock and
timer
1 BAKE. Press to select the bake function.
2 BROIL HIGH/LOW. Press to select the
broil function.
3 CONV BAKE/MULTI. Press to select baking
with convection on multiple racks.
4 CONV BAKE/1 RACK. Press to select
baking with convection on one rack.
5 CONV ROAST. Press to select roasting with
convection.
6 WARM/PROOF. Press once for warming or
twice for proofing. See the How to Set the
Oven for Warming section and the How to
Set the Oven for Proofing section.
7 START. Must be pressed to start any
cooking or cleaning function.
8 DISPLAY. Shows the operations you have
selected, the time of day and the cooking
or cleaning status.
9 COOK TIME. Use for Timed Bake, Timed
Convection Bake and Timed Convection
Roast operations.
10 DELAY START. Use along with the
COOK TIME or SELF CLEAN STD/LOW
pads to set the oven to start and stop
automatically at a time you select.
11 SELF CLEAN STD/LOW. Press to select
the self-cleaning function. See the Using
the Self-Cleaning Oven section.
12 PROBE. Press when using the probe to
cook food.
13 OVEN LIGHT ON/OFF. Press to turn the
oven lights on or off.
14 CLEAR/OFF. Press to cancel any oven
operation except the clock and timer.
15 TIMER ON/OFF. Press to select the
timer function. The timer does not control
oven operations. The timer can time up to
9 hours and 59 minutes.
16 NUMBER PADS. Use to set any function
requiring numbers—for example, the time
of day on the clock, the timer, the oven
temperature, the internal food temperature,
the starting and length of cooking time for
Timed Bake and the starting and length of
cleaning time for Self-Clean.
17 CLOCK. Press to enter the time of day.
If “F – and a number or letter” flash in the
display and the oven control signals, this
indicates function error code. Press the
CLEAR/OFF pad. Allow oven to cool for
one hour. Put the oven back into operation.
If function error code repeats, disconnect
power to the oven and call for service.
Double oven control shown. (Appearance may vary.)
Tones
The control has a series of tones that will sound
at different times. These tones may sound while
you set the control for an oven function or at
the end of the oven function. They will also
alert you when an incorrect time or
temperature has been entered or if
there is a problem with the oven.
When you press a touch pad, you will hear a
beep. This beep will let you know you have placed
enough pressure on the pad to activate it.
When you set an oven temperature, the
oven automatically starts to heat. When the
temperature inside the oven reaches your
set temperature, a tone will sound to let you
know to place the food in the oven.
An attention tone will sound if you set an
invalid function or try to set an additional
function. The tone can be quickly identified
by watching the display messages.
7