Filter
Top Products
Stainless steel
(If Included)
& metal parts
Do not use a steel-wool pad; it will scratch
the surface.
To clean the stainless steel surface, use warm
sudsy water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow the cleaner instructions for
cleaning the stainless steel surface.
To inquire about purchasing stainless steel
applicance cleaner or polish, or to find the
location of a dealer nearest you, please call our
toll-free number:
National Parts Center 800.626.2002
ge.com
Broiler pan
and grid
After broiling, remove the broiler pan from the
oven. Remove the grid from the pan. Carefully
pour out the grease from the pan into a proper
container.
Wash and rinse the broiler pan and grid in hot
water with a soap-filled or plastic scouring pad.
If food has burned on, sprinkle the grid with
detergent while hot and cover with wet paper
towels or a dish cloth. Soaking the pan will
remove burned-on foods.
Both the broiler pan and grid may be cleaned
with a commercial oven cleaner.
Both the broiler pan and grid can also be
cleaned in a dishwasher.
Do not clean the broiler pan or grid in a self-cleaning
oven.
Do not store a soiled broiler pan and grid anywhere
in the oven.
Oven racks
All oven racks may be cleaned by hand with an
abrasive cleaner or steel wool. After cleaning,
rinse the racks with clean water and dry with a
clean cloth. Gray porcelain-coated oven racks
(including the offset rack) may remain in the
oven during the self-cleaning cycle without
being damaged. The nickel-plated oven racks
(including the offset rack) may remain in the
oven during the self-cleaning cycle, but they will
lose their luster and become hard to slide. It
will be necessary to grease all oven rack side
edges with a light coating of vegetable oil after
cleaning them by hand or in the oven. This will
help maintain the ease of sliding the racks in
and out of the oven.
37
Care and Cleaning
Wall Oven
How to remove
protective shipping
film and
packaging tape
Carefully grasp a corner of the protective shipping
film with your fingers and slowly peel it from the
appliance surface. Do not use any sharp items to
remove the film. Remove all of the film before
using the appliance for the first time. To assure no
damage is done to the finish of the product, the
safest way to remove the adhesive from packaging
tape on new appliances is an application of a
household liquid dishwashing detergent. Apply
with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all parts.
It cannot be removed if it is baked on.
Oven rack
Offset rack (27″ models only)
BE SURE ELECTRICAL POWER IS OFF AND ALL SURFACES ARE COOL BEFORE CLEANING ANY
PART OF THE OVEN.