Filter
Top Products
22
Metro / Legacy Series
6. Press start symbol to begin timed bake function. bake and cook time indica-
tor lights will glow. After 5 seconds the time of day and temperature in oven will be displayed.
Temperatures will be displayed in increments of 5F or 5C until programmed temperature is
reached.
7. Once set temperature is reached, an audible signal will sound. Cooking wll begin after desired
temperature is reached.
8. At the completion of timed bake an audible signal is emitted and the oven will stop. The
temperature display will go off as well as the bake and cook time indicator lights.
The time of day will then be displayed.
9. Press cancel symbol to end timed bake function at any time. bake indicator light
and temperature display will go off. Only time of day will be displayed.
Note:
1. To verify oven temperature or length of cooking time while the oven is heating up, press
bake for temperature or cook time symbols. Information will be displayed for 5
seconds.
1. Press bake symbol. (temperature is automatically set at 350F or 175C and the
bake indicator light begins to flash)
2. Press increase or decrease symbols to change temperature setting. Temperature may
be set between 100F to 550F or 65C to 290C (fast scrolling begins after holding
increase or decrease symbol keys for over 5 seconds).
3. Press cook time symbol. (timer will display 00:00 and cook time indicator will begin
to flash)
4. Press increase symbol until desired cook time is set. (fast scrolling begins after holding
increase symbol key for over 5 seconds).
5. To correct time set press increase or decrease as needed.
6. Press stop time symbol to set desired time for cooking to be completed. stop time
indicator will flash and clock will automatically display the time the oven would normally shut
off if its duration were not delayed. (for example, if cook time is set to cook for 2 hours at
3 o’clock in the afternoon, then after pressing stop time the clock will automatically display
5:00 p.m. To change the time desired for cooking to end go to next step).
6C. Delayed Time Bake
(please read all steps prior to setting the delayed time bake function)