Filter
Top Products
32
Metro / Legacy Series
1. Press bake symbol. (temperature is automatically set at 350F or 175C and the
bake indicator light begins to flash)
2. Press decrease symbols to set desired temperature below 295F or 145C. (fast scrolling
begins after holding decrease symbol keys for over 5 seconds).
3. Press start symbol to begin sabbath mode bake function. bake indicator light will
glow, “SP” (Sabbath Program) will be displayed. After 5 seconds the time of day and
temperature in oven will be displayed. Temperatures will be displayed in increments of 5F or
5C until programmed temperature is reached.
4. Once set temperature is reached, an audible signal will sound.
5. Press cancel symbol to end sabbath mode bake function at any time. bake indicator
light and temperature display will go off. Only time of day will be displayed.
Note: The red indicator, located at the top right corner beside the oven temperature, will be on when
the element is powered and will go off when the element cycles off.
11. Sabbath Mode
11A. Sabbath Mode Bake
(please read all steps prior to setting the sabbath mode bake function)
1. Press convection symbol (temperature is automatically set at 325F or 160C and the
convection indicator light begins to flash)
2. Press decrease symbols to set desired temperature below 295F or 145C. (fast scrolling
begins after holding decrease symbol keys for over 5 seconds).
3. Press start symbol to begin sabbath mode regular convection function. bake
indicator light will glow, “SP” will be displayed. After 5 seconds the time of day and
temperature in oven will be displayed. Temperatures will be displayed in increments of 5F or
5C until programmed temperature is reached.
4. Once set temperature is reached, an audible signal will sound.
5. Press cancel symbol to end sabbath mode regular bake function at any time. bake
indicator light and temperature display will go off. Only time of day will be displayed.
Note: The red indicator, located at the top right corner beside the oven temperature, will be on when
the element is powered and will go off when the element cycles off.
11B. Sabbath ModeTrue Convection
(please read all steps prior to setting the sabbath mode regular convection function)