Heartland 3530 Range User Manual


 
50
Metro / Legacy Series
Accessories
Wok Ring #3389
Stainless steel 9” diameter ring manufactured to
fit standard size woks. The wok ring is designed
to fit into the grate fingers of Metro and Legacy
series ranges. (fig 25)
Legacy/Metro Griddle Kit #3809
Support is stainless steel for long lasting and easy
clean up. The griddle plate is ribbed on one side
for grilling and holds excess grease while cook-
ing. Flat side of griddle plate suited for pancakes
and similar foods. (fig 26)
Splashback kit #3801 (30”) & #3802 (36”)
Spashback kit required for 36” models with 0”
clearance to combustible rear walls. Kit contains
stainless panels for Metro series and coloured
porcelain panels for Legacy series. Kit also
includes two warming racks which mount 20”
above the stove top on the splashback.
Conversion Kits and
Information
The Metro and Legacy ranges are ordered from
the factory pre-set for either natural gas or
propane. They can be converted after installa-
tion by converting the pressure regulator and
replacing the orifices in the valves and burners
with the appropriate orifice kit.
How to order conversion kits:
Kits can be ordered from your dealer or directly
from Heartland Appliances. For more informa-
tion please call our order desk: (519) 650-5501
Fax (519) 650-3773
Note: Gas conversions to be performed by a
qualified gas technician.
If you still require help...
Heartland Ranges contain standard electrical
components available from your dealer or
Heartland Appliance Inc.
In case repair is required, consult your dealer
for an appliance repair depot near you. For
warranty service, please call your dealer first or
call Heartland, if necessary.
Bus. (519) 650-5501 or Fax (519) 650-3773
Toll Free Phone 1-800-361-1517
Toll Free Fax 1-800-327-5609
Have your serial number, model, and date of
purchase information ready. Without this
information, service response may be delayed
and replacement parts or diagnosis may be
incorrect.
For warranty coverage, see warranty statement.
(fig 25)
(fig 26)
Reference